Getting started
2
Battery installation
Install the battery as shown below.
Plug the battery connector securely into the socket inside the
handset battery compartment, matching the color-coded label.
Place the battery with the label THIS SIDE UP facing up and
the wires inside the battery compartment.
Align the cover flat against the battery compartment, then slide
it towards the center of the handset until it clicks into place.
Charge the handset by placing it in the handset charger. The
CHARGE light is on when the handset is charging.
1.
2.
3.
4.
If the handset will not be used for a long time, disconnect and
remove the battery to prevent possible leakage.
To purchase a replacement battery, visit our website at
www.vtechcanada.com or call 1 (800) 267-7377.
•
•
1 2
3
4
CHARGE light
remains on when
charging.
To Next Page
Loading...
Need help?
General
