5
Getting started
Installation options
The telephone comes ready for tabletop use. If you want to mount your telephone
on a wall, use the provided wall mount bracket to connect with a standard
dual-stud telephone wall mount plate. If you do not have this wall mount plate, you can
purchase one from many hardware or consumer electronics retailers. You may need a
professional to install the wall mount plate.
Tabletop to wall mount installation
Remove the telephone line cord
from the telephone wall jack, and the
telephone base power adapter from
the electrical outlet.
1.
Align the holes on the bracket with
the standard wall plate and slide the
bracket down until it locks securely.
3. Plug the telephone line cord into the
telephone wall jack. Plug the power cord
into an electrical outlet not controlled by
a wall switch. Bundle the telephone line
cord and power adapter cord neatly with
twist ties.
4.
Position the telephone base against the
wall mount bracket with the extended
tabs marked B on top. Insert the
extended tabs on the wall mount bracket
into the slots marked B on the back of
the telephone base. Push the telephone
base down until it clicks securely.
2.
To Next Page
Loading...
Need help?
General
