VTech CS6929-3 User Manual

15
Redial list
Each handset stores the last
10 telephone numbers dialed. Entries
are shown in reverse chronological
order. When there are already
10 entries, the oldest entry is deleted to
make room for the new entry.
Review a redial list entry
Press REDIAL to enter the redial list.
Press , , or REDIAL repeatedly
to browse until the desired entry
displays.
NOTE
You hear a double beep when you reach
the beginning or end of the redial list.
Dial a redial list entry
Press REDIAL to enter the redial list.
Press , , or REDIAL repeatedly
to browse until the desired entry
displays.
Press or to dial.
-OR-
Press or to take the line.
Press REDIAL to enter the redial list.
Press , , or REDIAL repeatedly
to browse until the desired entry
displays.
Press SELECT to dial the displayed
number.
Delete a redial list entry
Press REDIAL to enter the redial list.
Press , , or REDIAL repeatedly
to browse until the desired entry
displays.
When the handset displays the number
you want to delete, press DELETE.
You hear a confirmation tone.
1.
2.
•
1.
2.
3.
1.
2.
3.
4.
1.
2.
3.
Multiple handset use
Intercom
Use the intercom feature for
conversations between two handsets.
Your telephone base supports up to
five handsets. You can buy additional
expansion handsets (CS6909) for this
telephone base.
Press INT on your handset when not
in use.
If you have only one handset, your
handset displays INT needs 2 HS.
If you have two handsets, your
handset displays Calling HS X.
If you have three or more
handsets, your handset displays
Intercom to. Use the dialing keys
to enter a destination handset.
Your handset displays Calling HS X.
The destination handset rings and its
screen displays HS X is calling.
2. To answer the intercom call, press ,
, INT or any dialing key (0-9,
or ) on the destination handset.
Both handsets now display Intercom.
3. To end the intercom call, press OFF
or place the handset back in the
telephone base or charger.
NOTES
To cancel the intercom call before it is
answered, press OFF or INT.
Press OFF or MUTE on the destination
handset to temporarily silence the intercom
ringer.
If the destination handset does not answer
the intercom call within 100 seconds, is on
a call or out of range, the originating
handset displays Unable to call and
returns to idle mode.
If there is an incoming call while the
originating handset displays Calling HS X,
the intercom request will be stopped and
the screen displays Incoming call.
1.
•
•
•
•
•
•
•

VTech CS6929-3 Specifications

General

Brand	VTech
Model	CS6929-3
Category	Telephone
Language	English