How to reset VTech Telephone?
If your VTech Telephone isn't responding normally, place the handset in the telephone base. If it still doesn't respond, disconnect the power to the telephone base, disconnect the batteries on the handset, wait a few minutes, reconnect power to the base, reinstall the batteries, and place the handset in the base. Allow up to one minute for the handset to synchronize with the telephone base.
How to fix VTech Telephone when batteries do not charge?
If the batteries in your VTech Telephone handset aren't charging, first ensure the handset is correctly placed in the telephone base. If that doesn't work, remove and reinstall the batteries, then charge the handset for up to 16 hours. If the issue continues, you may need to purchase new batteries.
What to do if VTech CS6147 shows low battery?
If your VTech Telephone displays a low battery message, place the handset in the telephone base to recharge it. Alternatively, remove and reinstall the batteries, use the handset until the batteries are fully depleted, and then recharge it in the telephone base. If the problem persists, the batteries may need to be replaced.
General| Brand | VTech |
|---|---|
| Model | CS6147 |
| Type | Cordless Phone |
| Number of Handsets | 1 |
| Caller ID | Yes |
| Call Waiting | Yes |
| Display | LCD |
| DECT 6.0 Technology | Yes |
| Speakerphone | Yes |
| Intercom | No |
| Keypad | Yes |
| Wall Mountable | Yes |
| Power Source | AC Adapter and Rechargeable Battery |
| Range | Up to 1000 feet |
| Answering System | Digital Answering System |
| Expandable | Up to 5 handsets |
| Phonebook Capacity | 50 entries |
Instructions on how to dispose of old appliances and batteries.
Lists all items included in the telephone package.
Guidelines for optimal placement of the base unit to reduce interference.
Identifies and explains the functions of buttons and features on the handset.
Details the functions of various keys on the handset like UP/CALL LOG, DOWN/REDIAL, TALK OFF.
Identifies and explains the functions of buttons and features on the corded base.
Details the functions of keys on the base like LCD DISPLAY, UP, PHONE BOOK, MENU/OK.
Describes the handset charger cradle.
Explains the meaning of icons and symbols shown on the handset LCD.
Continues explaining icons like TAM, Call Log, Ringer, Keypad Lock, Battery status.
Illustrates the navigation paths and options within the handset's menu system.
Explains the symbols and indicators shown on the base unit's LCD screen.
Outlines the menu hierarchy and options available on the base unit.
Provides a guide for entering text and digits for names and numbers.
Details alphanumeric character mapping for phonebook and renaming functions.
Instructions on how to make calls to external numbers using handset or base.
Guide to dialing a number before or after taking the line.
How to make calls using stored contacts on handset and base.
Instructions for calling numbers from the received call history.
Guide to redialing numbers from the list of recently dialed numbers.
Information about how the call duration is timed and displayed.
How to use speed dial memory keys (M1, M2, M3) to make calls.
Procedures for answering calls on the handset and base.
Explains how to amplify earpiece volume for better hearing.
Methods to terminate an ongoing call using handset or base.
How to adjust the listening volume levels for calls.
Instructions to silence the microphone or turn off the ringer.
Method to lock or unlock the handset keypad to prevent accidental presses.
How to make emergency calls when the AC power is disconnected.
Instructions for redialing previously dialed numbers.
Steps to redial numbers and save them to contacts.
How to save numbers from the redial list into the phonebook.
Steps to remove single or all numbers from the redial list.
How to locate a misplaced handset using the base station paging feature.
Guide to making calls between handsets or between handset and base.
Specific steps for establishing an intercom call between units.
How to broadcast a call to all registered handsets simultaneously.
Instructions for transferring an incoming external call to another handset.
Guide to setting up a conference call with three participants.
Steps for adding new names and numbers to the phonebook.
How to find a specific contact by name.
Steps to display the details of a saved contact.
Guide to modifying existing contact information like name, number, or ringtone.
Instructions for removing a single contact from the phonebook.
How to erase all saved contacts from the phonebook.
Information on how many contacts slots are used and available.
Guide to assigning numbers to memory keys for quick dialing.
How to access and view the list of incoming and missed calls.
Steps to save a number from the call log into the contacts.
How to remove a single call record from the call log.
Instructions to clear all entries from the call log.
How to set the date and time on the phone.
How to configure date and time display formats (e.g., DDMMYY, 12/24 HR).
Configure and set the alarm clock function on the handset.
Settings specific to the cordless handset.
How to choose a ringtone for internal calls between units.
Configure ringtones and volume for internal/external calls.
Set alert tones, select base, and rename handset.
How to set what is shown on the screen when the phone is idle.
How to enable automatic answering of calls.
How to program speed dial numbers into memory keys.
Settings for the base station managed via the handset.
Steps to remove a handset from the base station.
How to select between Tone or Pulse dialing modes.
How to configure the flash hook timing for call waiting.
How to change the security PIN for base station settings.
Settings for the base station managed directly from the base.
How to set ringtones for internal calls on the base.
How to set ringtones for external calls on the base.
How to adjust the base ringer volume level.
Steps to remove a handset from the base station using the base.
How to configure the flash hook timing via the base.
How to enable or disable key press confirmation beeps.
How to change the security PIN for base station settings.
How to program speed dial numbers into memory keys on the base.
Procedure for registering a new handset to the base station.
How to restore handset and base settings to factory defaults.
How to enable or disable the telephone answering machine function.
Steps to listen to messages and manage playback controls.
How to erase all stored messages from the answering machine.
How to record voice memos for other users.
Configuration options for the answering machine.
How to choose between answering and recording or answering only.
Guide to recording a personalized greeting message for the answering machine.
How to listen to the recorded outgoing message.
How to remove a custom OGM and revert to the default greeting.
How to set the number of rings before the answering machine answers.
How to set the maximum length for recorded messages.
How to enable or disable call screening on the base.
How to adjust the quality and duration of recorded messages.
How to access answering machine functions remotely.
How to change the PIN for remote access to the answering machine.
How to enable or disable remote access functionality.
How to restore answering machine settings to factory defaults.
Detailed instructions on operating the answering machine remotely via phone.
General advice on handling, avoiding water, and cleaning the telephone.
Explains causes and solutions for interference and poor call quality.
Provides general steps to resolve issues when the phone is not responding normally.
Provides contact details for VTech technical support.
To Next Page
