VTech CS6147 User Manual

PHONE SETTINGS
43
7.5.6 Set the Keytone
The Key tone is a conrmation beep when you press any key. It is set on by default, but
can be turned off, if desired.
Press and / to select SETTINGS.
Press and / to select KEY TONE.
Press and / to select ON or OFF.
Press to conrm.
7.5.7 Change the System PIN
Press and / to select SETTINGS.
Press and / to select CHANGE PIN.
Press and you are requested to enter the 4-digit system PIN.
Enter the old system PIN.
Press and enter the new system PIN.
Press
and enter the new system PIN again.
Press to conrm.
7.5.8 Set the Memory Keys
There are 5 memory keys (from to ) on the corded base for you to store frequent
use numbers. After a number is stored in any of these memory keys, you can simply
press once on one of these memory keys to dial out to the number stored in it directly.
Using the base:
In idle mode, enter the telephone number you want to store.
Press and hold any memory key until you hear the conrmation tone to indicate the
number has been stored.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
1.
2.

VTech CS6147 Specifications

General

Brand	VTech
Model	CS6147
Category	Telephone
Language	English