57
8.5.9.2 Activate or Deactivate the Remote access
Using a handset:
Press and / to select TAM.
Press and / to select SETTINGS.
Press and / to select REMOTE.
Press and / to select ON or OFF to turn on or off the remote
access respectively.
Press to conrm.
Using the base:
Press and / to select ANS. MACHINE.
Press and / to select TAM SETTINGS.
Press and / to select REMOTE ACCESS.
Press and / to select ON or OFF to turn on or off the remote
access respectively.
Press to conrm.
8.5.9.3 Reset TAM to Default Settings
Using the base:
Press and / to select ANS. MACHINE.
Press and / to select TAM SETTINGS.
Press and / to select TAM DEFAULT.
Press and then enter the correct system PIN (default PIN is 0000).
Press to restore the TAM settings to default.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.