VTech CS6147 - System PIN Code Management; Base Settings via Base Unit

40
PHONE SETTINGS
7.4.4 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the base station.
It is used to protect your phone against unauthorized use. The default system PIN is
0000.
Press and / to select BS SET.
Press and / to select CHG PIN.
Press and you are requested to enter the 4-digit system PIN.
Enter the old system PIN.
Press and enter the new system PIN.
Press and enter the new system PIN again.
NOTE:
If the new PIN entered in Step 6 is not matched with the new system PIN entered in
Step 5, user is requested to enter the valid system PIN again in Step 5.
Press to conrm the setting.
1.
2.
3.
4.
5.
6.
7.