17
4.2 Make a Call from Direct Access Memory
Using a handset:
In idle mode, press and hold / / to dial the number pre-stored into the
keys respectively.
OR
Press , and then press and hold / / to dial the number pre-stored into the
keys respectively.
NOTES:
You need to set the direct access number rst. See section 7.3.10 for details.
If no number is stored, you will hear double beeps tone.
Using the base:
In idle mode, press / / / / , the phone will automatically dial out the telephone
number stored in the selected memory key in speakerphone mode.
4.3 Answer a Call
Using a handset:
If the handset is not on the charging cradle or the base station:
When the phone rings, press to answer a call. Press it again to turn on the
speakerphone.
If the handset is on the charging cradle or the base station and if AUTO ANS is set to be
ON: When the phone rings, pick up the handset to answer a call.
Using the base:
When there is an incoming ring, pick up the corded handset or press to answer
the call.
•
•
To Next Page
Need help?
General
