47
8.2 Play Messages on TAM
If you have new messages, the display will show e.g. 02/05 MSGS, which means you
have 2 new message out of total 5 messages. New messages are played rst, and then
are saved as old messages, until they are deleted. Old messages are played again after
all new messages are played completely.
Using a handset:
Press and / to select TAM.
Press to select PLAYBACK.
Press again to start message playback and the screen displays the date of
the message received.
During message playback, press or to increase or decrease the message
playback volume respectively.
NOTE:
After new message is played, the new message will be saved as an old message
automatically unless it is deleted.
Press and / to select STOP, FORWARD, PREVIOUS or DELETE to
perform the following functions during message playback.
STOP: Stop the current message playback and return to the TAM menu.
FORWARD: Skip to play the next message. The date information of the next
message will display if there is next message.
PREVIOUS: Skip to repeat playing the current message from the beginning. The
date information of the current message will display.
DELETE: Delete the current message and the next message will be played.
Press to conrm the setting.
NOTE:
Alternatively, you can use the following shortcut keys to control different operation
during message playback.
Press 5 to stop message playback.
Press 4 to skip to repeat playing the current message from the beginning. Press 4
twice to skip backward to the previous message.
Press 6 to skip to play next message.
Press 2 to delete the current message playback.
1.
2.
3.
4.
5.
•
•
•
•
6.
•
•
•
•
To Next Page
Loading...
Need help?
General
