VTech CS6147 - De-registering Handset via Base; Base Flash Time Setting

42
PHONE SETTINGS
7.5.4 De-register a Handset
You will need to enter the 4-digit system PIN codein order to de-register a handset from
the base station. (The default PIN is 0000.)
Press and / to select SETTINGS.
Press and / to select DELETE HS.
Press and you are requested to enter the 4-digit system PIN.
Enter the 4-digit system PIN.
Press and a list of registered handsets is displayed.
Press / to select one of the handsets that you want to de-register.
Press to conrm.
7.5.5 Set the Flash Time
The default ash time is best suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
Press and / to select SETTINGS.
Press and / to select FLASH TIME.
Press and / to select the desired ash time.
Press to conrm.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.