22
USE YOUR PHONE
4.11.4 Delete the Entire Redial List
Using a handset:
Follow Steps 1 and 2 in section 4.11.1.
Press and / to select DEL ALL.
Press to conrm.
Press to reconrm.
Using the base:
Follow Steps 1 and 2 in section 4.11.1
Press and / to select DELETE ALL?
Press to conrm.
Press to reconrm.
4.12 Find the Handset
This feature helps you nd the misplaced handset(s).
You can locate the handset by operation on the base station as below.
In idle mode, press and / to select PAGE ALL HS.
Press
to conrm
. “PAGING” will ash on the base screen.
All the handsets registered to the base will produce the paging tone and “PAGING”
ashes on the screen. You can stop the paging by pressing / / on any
handset or on the base to stop paging.
NOTE:
If there is an incoming call during paging, the phone will ring with the incoming call
instead of paging.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
To Next Page
Loading...
Need help?
General
