VTech CS6147 - Connect the Corded Base Station; Connect the Charger

SET UP THE TELEPHONE
3
2.3 Connect the Corded Base Station
Insert the DC plug of the power adapter and the telephone line cord into the base
station, as shown above.
Insert the other end of the power adapter into the wall outlet not controlled by a wall
switch and the telephone line cord into a telephone wall jack. If you have DSL high
speed internet service, a DSL lter (not included) is required.
NOTES
Always use the cables supplied with the product.
Use only the power adapter supplied with the base station.
2.4 Connect the Charger
Plug the power adapter into the wall outlet not controlled by a wall switch.
1.
2.
•
•
1.