VTech CS6147 - Answering Machine Settings Overview; Setting Answer Mode

50
ANSWERING MACHINE
8.5 Answering Machine Settings (Base Only)
8.5.1 Set the Answer Mode
By default, the answer machine is set in ANS&REC mode which allows callers to leave
a message. This mode can be changed to ANSONLY which does not allow callers to
leave a message. In that case, your callers will be prompted to call back later.
You can select ANS & REC or ANSWER ONLY for the answering machine.
Using a handset:
Press and / to select TAM.
Press and / to select SETTINGS.
Press and / to select ANS MODE.
Press and / to select ANS&REC or ANSONLY.
Press to conrm.
Using the base:
Press and / to select ANS. MACHINE.
Press and / to select TAM SETTINGS.
Press to show ANSWER MODE.
Press and / to select ANS & REC or ANSWER ONLY.
Press to conrm.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.