28
Temporary ringer silencing
When the telephone is ringing, you can
temporarily silence the ringer of the
handset and telephone base without
disconnecting the call. The next call
rings normally at the preset volume.
Press OFF or MUTE on the handset
and it displays Ringer muted and .
Press MUTE or CANCEL on the
telephone base. The screen displays
Ringer muted and .
Each handset and the base ring when
there is an incoming call unless the ringer
volume of that device is turned off.
Quiet mode
You can turn on the quiet mode for a
period of time (1-12 hours). During this
period, all tones (except paging tone)
are muted. When you turn on the quiet
mode, the answering system turns on
automatically.
To set the duration and turn on the
quiet mode:
Press and hold
when the
phone is not in use.
The screen displays Quiet: _ _
hours. Use the dialing keys (0-9) to
enter the desired duration (1-12).
Press SELECT to save. You hear
a confirmation tone. The screen
displays Quiet mode on and .
•
•
•
1.
2.
3.
To turn off the quiet mode:
Press and hold when the
phone is not in use. The screen
displays Quiet mode off briefly and
then returns to idle.
When you change the settings of the
ringer tone or ringer volume, you can still
hear the samples even if the quiet mode
is on.
•
•
To Next Page
Loading...
Need help?
General
