EN - 10
Installation
SIP Contemporary Cordless 1-line -
CTM-S2412
SIP Contemporary Cordless 1-line
Accessory Handset - CTM-C4402
Installation option - install base stand
for desktop
To mount the telephone base on the base
stand
1. Turn the telephone base over with the bottom
side facing up.
2. Insert the lower tabs of the mounting bracket
into the lower grooves of the telephone base.
3. Press the upper tabs of the mounting bracket
and then push into the center of the telephone
base until it locks into place.
1 Charge LED
Cordless charging stand -
C4012
1
To Next Page
Loading...
Need help?
General
