52
SIP classic cordless 2-line - S1420
Telephone operation
Conference call
6JKUVGNGRJQPGCNNQYUVJTGGYC[EQPXGTUCVKQPU
To
initiate a conference call:
2NCEGCECNNVQVJGſTUVRCTV[
Press HOLDVQRNCEGVJGſTUVRCTV[QPJQNF
2NCEGCUGEQPFECNNQPVJGQVJGTNKPG
Once the second party is on the line, press CONFVQUVCTVCVJTGGYC[EQPHGTGPEG
To initiate a conference call while both calls are on hold:
Press CONFVQUVCTVCVJTGGYC[EQPHGTGPEG
To switch a conference call from the telephone base to the cordless handset:
During a conference call on the telephone base, press
/SPEAKER or CONF QPVJGEQTFNGUUJCPFUGV
During a conference call on the telephone base, press HOLD on the telephone base and then press CONF on the
EQTFNGUUJCPFUGV
To switch a conference call from the cordless handset to the telephone base:
During a conference call on the cordless handset, press
/SPEAKER or CONF QPVJGVGNGRJQPGDCUG
During a conference call on the cordless handset, press HOLD on the cordless handset and then press CONF on the
VGNGRJQPGDCUG
To end a conference call:
Press VJGNKPGMG[VJCV[QWYCPVVQOCKPVCKPEQPPGEVKQPCPFVJGQVJGTNKPGYKNNDGFTQRRGF
When the conference call is in speakerphone mode, press CONF or
/SPEAKER to end
When the conference call is in handset earpiece mode, press OFF on the cordless handset or place the cordless handset back
in the telephone base to end
When there is more than one handsetQPVJGEQPHGTGPEGECNNVJGECNNGPFUYJGPCNNVGNGRJQPGUJCPIWR
Find handset
7UGVJKUHGCVWTGVQſPFCNNTGIKUVGTGFEQTFNGUUJCPFUGVU
To start paging:
Press
/FIND HANDSET on the telephone base when the RJQPGKUPQVKPWUG#NNKFNGEQTFNGUUJCPFUGVUDGGRHQTUGEQPFU
To end paging:
Press
/FIND HANDSETCICKPQPVJGVGNGRJQPGDCUG
-OR-
2TGUUCP[MG[QPVJGEQTFNGUUJCPFUGVVQUVQRVJGRCIKPIVQPG
Computer port
You can route your computer through the COMPUTER port (RJ-45)QPVJGUKFGQHVJGVGNGRJQPGDCUGVQIGV+PVGTPGVCEEGUU
USB port
The
port on the side of the telephone base can be used for charging devices WRVQO#"8 Charging will be suspended
YJGPVJGTGKUCPKPEQOKPIECNNQTVJGVGNGRJQPGKUKPWUG
•
•
•
•
•
•
•
•
•
•