VTech DECT6.0 DS6151

35
Telephone operation
Dial a redial entry (continued)
Using the telephone base:
Press the REDIAL softkey when the telephone base is not in use.
Press /CID or /DIR to browse to the desired number.
Press LINE 1 or LINE 2 to dial.
Save a redial entry to the directory
Using the handset:
Press REDIAL/PAUSE when the handset is not in use.
Press or to browse to the desired number.
Press the SAVE softkey.
The screen shows ENTER NUMBER. Use the dialing keys to edit the
number, if necessary.
Press the NEXT softkey to move to the name.
The screen displays ENTER NAME. Use the dialing keys to enter the
name (see step 6 of Create a new directory entry on page 44).
Press the SAVE softkey and Saved to Directory displays for a few seconds.
Using the telephone base:
Press the REDIAL softkey when the telephone base is not in use.
Press /CID or /DIR to browse to the desired number.
Press the SAVE softkey.
The screen shows ENTER NUMBER. Use the dialing keys to edit the
number, if necessary.
Press the NEXT softkey to move to the name.
The screen displays ENTER NAME. Use the dialing keys to enter the
name (see step 6 of Create a new directory entry on page 44).
Press the SAVE softkey and Saved to Directory displays for a few seconds.
Delete a redial entry
Using the handset:
Press REDIAL/PAUSE and then press or to select the desired number.
Press the DELETE softkey to delete.
Using the telephone base:
Press the REDIAL softkey and then press /CID or /DIR to select the
desired number.
Press the DELETE softkey to delete.
1.
2.
3.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.
1.
2.
1.
2.