51
Telephone operation
Store a speed dial entry
You can store up to 10 directory entries in the speed dial
directory. The speed dial entries are shared by all system
handsets and telephone base.
Using the handset:
Press the MENU softkey when the handset is not
in use.
Press or to select DIRECTORY, then press the
SELECT softkey.
Press or to select Speed dial, then press the
SELECT softkey. The screen shows a list from
1:<empty> to 0:<empty>.
Press or to select the desired speed dial location,
then press the REPLACE softkey. The screen shows
the directory listed in chronological order.
Press or to browse and select the desired
entry, then press the ASSIGN softkey to confirm
your selection.
Using the telephone base:
Press the MENU softkey when the telephone base is
not in use.
Press /CID or /DIR to select Directory, then press
the SELECT softkey.
Press /CID or /DIR to select Speed dial, then press
the SELECT softkey. The screen shows a list from
1:<empty> to 0:<empty>.
Press /CID or /DIR to select the desired speed
dial location, then press the REPLACE softkey.
The screen
shows the directory listed in
chronological order.
Press /CID or /DIR to browse and select the desired
entry, then press the ASSIGN softkey to confirm
your selection.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
ASSIGN
VTech
800-595-9511
DIRECTORY
Review
Add contact
Speed dial
BACK
SELECT
DELETE
REPLACE
SPEED DIAL
1:<empty>
2:<empty>
3:<empty>
DELETE
REPLACE
SPEED DIAL
1:VTech
2:<empty>
3:<empty>
Review
Add contact
Speed dial
SELECT
SPEED DIAL
1:<empty>
2:<empty>
DELETE REPLACE
SPEED DIAL
1:VTech
2:<empty>
DELETE
REPLACE
VTech
800-595-9511
ASSIGN
To Next Page
Loading...
Need help?
General
