59
Telephone operation
Save a call log entry to the directory
Using the handset:
Select a desired entry in the call log (see Review the call log on page
57).
When the desired entry appears, press the SAVE softkey. The screen
shows EDIT NUMBER.
Use the dialing keys (0-9) to edit the number.
Press OFF to backspace and erase a digit.
Press and hold OFF to return to the idle mode.
Press
to move the cursor to the left or to the right.
Press and hold
REDIAL/PAUSE to insert a dialing pause (a p appears).
Press the NEXT softkey to move to the name. The screen displays
EDIT NAME.
Use the dialing keys (see page 47) to edit the name.
Press OFF to backspace and erase a character.
Press and hold OFF to return to the idle mode.
Press to move the cursor to the left or to the right.
Press the SAVE softkey, then the screen shows the saved directory.
Press OFF to exit to the previous menu.
Using the telephone base:
Select a desired entry in the call log (see Review the call log on page
57).
When the desired entry appears, press the SAVE softkey. The screen
shows EDIT NUMBER.
Use the dialing keys (0-9) to edit the number.
Press CANCEL to backspace and erase a digit.
Press and hold CANCEL to return to the idle mode.
Press
/CID to move the cursor to the left or /DIR to the right.
Press the PAUSE softkey to insert a dialing pause (a p appears).
Press the NEXT softkey to move to the name. The screen displays
EDIT NAME.
Use the dialing keys (see page 47) to edit the name.
Press CANCEL to backspace and erase a character.
Press and hold CANCEL to return to the idle mode.
Press
/CID to move the cursor to the left or /DIR to the right.
1.
2.
3.
•
•
•
•
4.
5.
•
•
•
6.
7.
1.
2.
3.
•
•
•
•
4.
5.
•
•
•
If you try to save a call log entry to the directory that is already saved in
the directory, the telephone base or handset shows
Already saved.
If you try to save a call log entry without caller ID information, the telephone
base or handset shows
Unable to save.
•
•
To Next Page
Loading...
Need help?
General
