30
Telephone settings
Voice Announce
®
caller ID
The voice announce caller ID feature lets you know who is calling without having
to look at the display. When you have an incoming call, the handset and base
announce the caller’s name based on the directory or caller ID information. If the
caller’s name is private or unknown, the phone number will be announced. If the
caller’s phone number is also private or unknown, no caller information will be
announced. If the telephone number has over 11 digits, only the last 11 digits will be
announced. Unless you change it, the voice announce caller ID feature is already
turned on.
Press MENU when the handset is not in use.
Press or to scroll to Annc Caller ID, then press SELECT.
Press or to scroll to On or Off, then press SELECT to
save your selection and return to the previous menu. You hear
a conrmation tone.
The screen displays Annc CID ON on all devices when you
choose On.
The screen displays Annc CID OFF on all devices when
you choose Off.
To use the voice announce caller ID feature, you must
subscribe to caller ID service from your telephone service provider.
Voice announce caller ID is available in English and French.
The voice announce caller ID is muted when you turn the ringer off.
Only the first four registered handsets are able to use the voice announce
caller ID feature.
It takes at least two rings for the phone to receive caller ID information and
announce it. If the phone is answered before the end of the second ring, it will not
have time to announce the caller ID information.
Pronunciation of names may vary with this feature. Not all names may be
pronounced correctly.
1.
2.
3.
•
•
•
•
•
•
•
•
Set date/time
>Annc Caller ID
ANNC CALLER ID
>On
To Next Page
Loading...
Need help?
General
