www.vtechphones.com
34
Answering system operation
Window display: When:
0
There are no messages.
1-95
Total number of old message(s).
0-95 (ashing)
Total number of new message(s) or clock has not been set.
1-95 & F (alternating)
Memory is full with total number of new or new and old
message(s) recorded. (Maximum number of messages is
95.)
1-99 (counting)
Elapsed time while recording a memo or announcement up
to 90 seconds.
99 (ashing)
Recording time exceeds 99 seconds.
1-95
Current message number during old message playing back.
1-95 (ashing)
Current message number during new message playing back.
1-8 (steady for two seconds)
Indicates volume level selected when pressing the volume
up/down key.
10-99 (steady for two seconds)
Shows the current remote access code.
ON or OF (steady for two seconds)
Display when any setting is changed from on or off.
-- (steady)
System is in programming mode, initializing or a handset is
off hook or on a call.
-- (ashing)
System is in programming mode.
To Next Page
Loading...
