VTech Kidizoom Action Cam HD - Page 22

22
22
22
320 X 240 (240p): The video quality is better, but will take up more
memory so only a smaller number of videos can be recorded and
saved.
Note:
• HD video (1280 X 720) is only available when using a memory
card. This can be selected in Video mode directly.
• Only 320 X 240 (240p) and 160 X 120 (120p) video resolutions
support video themes and effects.
(F) Camera Screen Auto Off
Press the left or right buttons to turn this function on or off. Then,
press the OK button to conrm. If it is turned on, the screen will
automatically turn off after a certain amount of time in Camera mode,
Video mode or Time-Lapse mode.
Note: For safety, VTech
®
highly recommends setting the screen to
auto off when the camera is mounted on a bike or skateboard, etc.
(G) Advanced Settings
Press the OK button to enter the advanced settings menu.
Press the left or right buttons to select an advanced setting
item and press the OK button to enter.
(i) Memory
Here you can see the memory status of the internal memory or
memory card. You can also choose to format the memory by
pressing the OK button . Follow the instructions on the screen if
you would like to format the memory.
Note:
• Formatting will erase all data stored in the memory, including all
taken photos and videos.
• If a memory card is being used, data stored in the internal
memory cannot be seen unless the memory card is removed.
• When the internal memory of Kidizoom
®
Action Cam HD is
getting full, or when the le indexes are used up, you should
back up all of the les from the camera’s internal memory to your
computer. Then, delete the les in the internal memory to free up
space.
(ii) Indoor Light Frequency
Here you can set the A.C. power frequency according to the region
you’re in when travelling. If it is not set correctly, you may see some
ickering on the preview screen and on captured les when you are
in an indoor environment. Press the left or right buttons to
select an option and press the OK button to conrm.