VTech Kidizoom Duo Deluxe - Camera Settings and System Options

21
21
21
Factory Reset
Factory Reset will erase the contents stored in the internal memory
and reset all system settings to factory default, e.g le index, photo
resolution, game level and captured game faces.
Following these three commands, you will be asked to conrm your
choice. Follow the instructions on screen to conrm the action.
NOTE: If the memory card is being used, data stored in the internal
memory cannot be seen in the camera unless the memory card
is removed. When the internal memory of the Kidizoom
®
DUO
Deluxe is getting full, or when the le indexes are used up, you
should back up all the les from the camera’s internal memory
to your computer. Then delete the les in the camera’s internal
memory to free up space.
C. Camera Settings
This menu allows you to adjust various camera related options. Press
the Up
or Down Cursor Buttons to select an item and press the
OK Button to toggle the options.
Front Camera Resolution – For the best picture quality, please select
High Quality Mode
. Otherwise, choose Low Quality Mode if
you would like to save more pictures.
Indoor Light Frequency – The default frequency is set according to
the A.C. frequency of your region. Please leave your camera set to the
default value unless you are travelling.
Photo Optimization – Set Photo Optimization to ON
or OFF .
For more information on Photo Optimization, please refer to the Camera
section of this manual.
Self Timer – Set the Self Timer to ON
or OFF . The Self Timer
will be set to OFF every time the unit is turned on.
D. Date & Time
This menu shows the current date and time. If you would like to change
the date or time, press the OK Button
. After entering the Set Date
& Time menu, press the Up or Down Cursor Buttons to change
the settings, or press the Left or Right Cursor Buttons to jump
to the next item. Once you are done, press the OK Button to exit
this menu.
E. Language
This menu allows you to change the language of your camera. Press the
Up
or Down Cursor Button to select a language and press the
OK Button to conrm.