EasyManuals Logo

VTech Kidizoom Spin & Learn Camera User Manual

VTech Kidizoom Spin & Learn Camera
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
CONNECTING TO A COMPUTER
You can connect Kidizoom
®
Spin & Smile Camera
TM
to a PC or Mac
computer using the included USB cable. Once connected, you can
transfer les between the camera and computer. Please follow the
below steps to make the connection.
Turn the camera off before connecting to a computer.
Pull up the rubber cover of the USB port at the bottom of your
camera.
Insert the USB cable (small end) into the USB port on the camera.
Insert the larger end of the USB cable into a USB port on the computer.
A USB port is usually marked with this symbol
.
A removable drive called “VTech 1228” will appear. If there is a SD/
SDHC card in the unit, the removable drive will show the content on
the SD card only.
To back up photo or video les taken by the camera:
Locate and open the “DCIM” folder in the removable drive.
Your photos or video les will be placed in the subfolders, such as
“100VTECH”. Drag and drop the les to a location in your computer
for back up.
To back up voice les recorded by the camera:
Locate and open the “VOICE” folder in the removable drive.
Drag and drop the recorded voice les to a location in your computer
for back up.
To transfer photo or video les to the camera:
Select the photo or video les you would like to upload from your
computer rst.
Connecting To A Computer

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the VTech Kidizoom Spin & Learn Camera and is the answer not in the manual?

VTech Kidizoom Spin & Learn Camera Specifications

General IconGeneral
BrandVTech
ModelKidizoom Spin & Learn Camera
CategoryToy
LanguageEnglish

Related product manuals