5
Battery Installation (Unicorn)
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the underside of
the unit.
3. Install 4 new AA size (LR6/AM-3) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance).
4. Replace the battery cover to secure it.
Battery Installation (Brush)
1. Make sure the unit is turned OFF.
2. Locate the battery cover of the unit.
3. Install 2 new AAA size (LR03/AM-4) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance).
4. Replace the battery cover to secure it.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Donotdisposeofbatteriesinre.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
To Next Page
Loading...
Need help?
General