VTech Pendant User Manual

1 INSTALLING YOUR PENDANT WITH A DECT PHONE
First to power up your Dect phone used at home.
Then power up the Pendant.
Do the registration procedure with the Dect phone. See section 4, “Enter Registration Mode”.
Pls use only the provided adaptor connected to the charger base.
Important : Charging the Pendant unit for at least 5 hours before use.
Power adaptor information for Pendant :
Manufacturer : Tenpao
Model : S005IU0600040, Input 100-120V AC 60Hz 150mA, Output 6VDC 400mA
Manufacturer : CHOU SEN ELECTRONICS (SZ) CO., LTD.
Model : CS2A060040LUF, Input 100-120V AC 60Hz 200mA, Output 6VDC 400mA
Battery installed in the unit :
Manfacturer : BYD
Type : Lithium-ion polymer rechargeable battery
Model : VT-02
Capacity : 3.7V, 450 mAh, 1.665 Wh

VTech Pendant Specifications

General

Brand	VTech
Model	Pendant
Category	Cordless Telephone
Language	English