VTech Pull & Sing Puppy - Getting Started; Battery Installation; Battery Notice

5
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc)orrechargeable(Ni-Cd,Ni-MH),ornewandusedbatteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Remove rechargeablebatteries from the toybeforecharging
(ifremovable).
• Rechargeable batteries are only to be charged under adult
supervision.
Getting Started
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of
the unit. Use a screwdriver to loosen the
screw.
3. Install2newAAA(AM-4/LR03)batteries
following the diagram inside the
battery box. (The use of new alkaline
batteriesisrecommendedformaximum
performance).
4. Replace the battery cover and tighten the
screw to secure.