VTech Pull & Sing Puppy User Manual

9
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
pleasefollowthesesteps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
at1-800-521-2010intheU.S.or1-877-352-8697inCanada,orbygoing
to our web site at www.vtechkids.com and filling out our Contact Us
form located under the Customer Support link. A service representative
will be happy to help you.
Troubleshooting
IMPORTANT NOTE:
Creating and developing Infant Learning products is accompanied
by a responsibility that we at VTech
®
take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department
at1-800-521-2010intheU.S.or1-877-352-8697inCanada,or
by going to our web site at www.vtechkids.com and filling out our
Contact Us form located under the Customer Support link with
any problems and/or suggestions that you might have. A service
representative will be happy to help you.

VTech Pull & Sing Puppy Specifications

General

Brand	VTech
Model	Pull & Sing Puppy
Category	Toy
Language	English