VTech Put & Take Dumper Truck - Troubleshooting

10
TROUBLESHOOTING
Ifforsomereasontheprogram/activitystopsworkingormalfunctions,
pleasefollowthesesteps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Lettheunitstandforafewminutes,thenreplacethebatteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. Iftheproductstilldoesnotwork,replacewithanentiresetofnew
batteries.
Iftheproblempersists,pleasecallourConsumerServicesDepartment
at01235546810(fromUK)or+441235546810(outsideUK),anda
service representative will be happy to help you.
IMPORTANT NOTE:
Creating and developing VTech products is accompanied by a
responsibility that we at VTech
®
takeveryseriously.Wemakeevery
efforttoensuretheaccuracyoftheinformation,whichformsthe
valueofourproducts.However,errorssometimescanoccur.Itis
important for you to know that we stand behind our products and
encourageyoutocallourConsumerServicesDepartmentonat
01235546810(fromUK)or+441235546810(outsideUK),with
anyproblemsand/orsuggestionsthatyoumighthave.Aservice
representative will be happy to help you.
Troubleshooting