7
1 Light Sensor
2 Camera Lens
3 Infrared LEDs
• Allow you to see clearly in a dark environment.
4 Microphone
5 Night Light
6
Night Light Control Key
• Go to Night Light section to learn more.
7 LED Indicator
• Red is steadily on when the baby unit is connecting to the parent unit in direct mode.
• Green is steadily on when the baby unit is connected in Wi-Fi router mode.
• Red ashing slowly during video streaming in direct mode.
• Green ashes slowly during video streaming in Wi-Fi router mode.
8 ON/OFF Switch
• Power it on or o.
9 Speaker
10 Temperature Sensor
11 Power Jack
12 Wall Mount Slots
13 PAIR
• The parent unit and baby unit(s) provided are already paired.
• Reset the baby unit to factory default.
1. Press and hold PAIR key until you hear a beep sound.
2. Release the PAIR key, and then press the PAIR key again ve times until you
hear another beep sound.
3. The baby unit will sound another beep when the reset completes. Then, the baby
unit will reboot.
To Next Page
