17
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to use again.
5. If the unit still does not work, install a new set of batteries.
If there is a Bluetooth
®
connection problem, please follow these steps:
1. Delete “VTech 5510 Microphone” from your device’s list of paired
Bluetooth
®
devices.
2. If applicable, select to forget the pair code of the microphone.
3. Hold down the Bluetooth
®
Button on the microphone to initiate
the pairing process.
4. Reconnect the microphone to your device by selecting “VTech
5510 Microphone” from the list of available Bluetooth
®
devices on
your device.
5. Enter the audio PIN code provided by the microphone.
To Next Page
Loading...
