8 9
2. Setup
Setup
Date and time
After you install your telephone or power returns following a power outage and battery
depletion, the handset will prompt you to set the date and time, and to configure the
Smart call blocker and answering system through the voice guides.
Follow the steps below to set the date and time. For example, if the date is
31 December, 2023, and the time is 10:59 PM:
When the
handset prompts
you to set the
date and time...
If you subscribe
to caller ID
service, the
day, month and
time are set
automatically
with each
incoming call.
- OR -
When the handset is not in use:
1. Press MENU.
2. Press or to scroll to
Set date/time.
3. Press SELECT, and then
follow the Date and time
steps to set the date and time.
Make sure you set the date
and time including the year
correctly; otherwise the
answering system does not
announce the correct day of
the week for your recorded
messages time stamp.
Ringers
>Set date/time
1
Enter the month (MM),
day (DD), and year (YY).
MM/DD/YY
01/01/23
2
Press SELECT.
MM/DD/YY
12/31/23
3
Enter the hour (HH) and
minute (MM).
HH:MM
12:00 AM
4
Press any number key
to toggle between AM
and PM.
HH:MM
10:59 AM
5
Press SELECT to save.
HH:MM
10:59 PM
To Next Page
Loading...
