16 17
2. Setup
Setup
Enable or disable internal SOS alert
Internal SOS alert is enabled by default.
When you press and hold AUDIO ASSIST/SOS to make an emergency call, the telephone
pages all registered system devices for 20 seconds. After that, the telephone then calls the
five preset SOS numbers in sequence, until the call is answered.
You can disable this setting to allow you to make emergency calls directly to the preset SOS
numbers.
Record SOS message
1
Press MENU on the handset when it is not in use.
Scroll to Set SOS, and then
press SELECT.
2
Direct memory
>Set SOS
Press to select
Call internal.
3
>Call internal
SOS number
Scroll to select Enable or
Disable, and then press SELECT.
4
CALL INTERNAL
>Enable
1
Press MENU on the handset when it is not in use.
Scroll to SOS message,
and then press SELECT.
3
SOS number
>SOS message
Scroll to Set SOS, and
then press SELECT.
2
Direct memory
>Set SOS
Press SELECT to select
Record annc.
4
>Record annc
Play annc
“Record after the
tone. Press STOP
when you are done.“
Speak toward the
cordless handset
to record your
message. Press 5
when done.
5
RECORD SOS
5-STOP
Make sure your recorded SOS message includes your name, your SOS message, and
a request to the far-end caller on pressing any number key to start a conversation.
When you make an emergency call with the AUDIO ASSIST/SOS button on the
cordless handset, the SOS message is played to the call receiver after he/she picks up.
The default SOS message is “This is an emergency call. Please press any number key to
start the conversation.” You can record your own message using the cordless handset.