VTech SN5147 User Guide

26 27
2. Setup
Setup
Caller ID announce on/off
The caller ID announce feature lets you know who’s calling without having to look at the
display. When you have an incoming call, the handset and/or base speaks “Call from...”
and the name of the caller based on the phonebook or caller ID information. The default
setting is On.
• To use the caller
ID announce
feature, you
must subscribe
to caller ID
service from
your telephone
service provider.
1
Press MENU when the handset is not in use.
Use caller ID to automatically set date and time
If you subscribe to caller ID service, you can choose to set the date and time for each
incoming call by the caller ID information automatically. The default setting is On.
1
Press MENU when the handset is not in use.
Scroll to Caller ID annc,
and then press SELECT.
2
Talking digits
>Caller ID annc
Scroll to select On or Off,
and then press SELECT.
3
CALLER ID ANNC
>On
Scroll to Settings, and
then press SELECT.
2
Set date/time
>Settings
Scroll to CID time sync,
and then press SELECT.
3
Key tone
>CID time sync
Scroll to On or Off, and
then press SELECT.
4
CID TIME SYNC
>On

VTech SN5147 Specifications

General

Color	white
Speakerphone	yes
Expandable	yes
Paging Locator	yes
Volume Control	yes
Intercom	yes
Incoming Lines	1
Visual Ring Indication	yes
Dialing Mode	pulse, tone
Record Time	22 minutes
Display Type	lcd
Message Counter	yes
New Message Indicator	yes
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	yes
Redial Function	yes
Conference Call	yes
Conference Call Capability	yes
Mute	yes
Hold Button	no
Speed Dial Memory	yes
Caller ID Memory	50 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	1, 4
Backlit Keypad	yes
Keypad Location	handset
Bluetooth	no
Remote Access	yes
Frequency	1.9ghz