VTech SN5147 User Guide

54 55
Bluetooth®
4. Bluetooth
Bluetooth headset name
Auto connection
• After you have paired a Bluetooth headset, you can set the cordless handset
to automatically connect to the paired Bluetooth headset when it is within
range of the cordless handset (default setting).
Manual connection
• If you choose to connect the paired Bluetooth headset manually, the cordless
handset will connect to the paired Bluetooth headset when you press the
Bluetooth key ( ) to make a call, or answer an outside call or intercom call.
The Bluetooth headset will be disconnected after each call.
Scroll to Connect. mode
and then press SELECT.
2
Remove headset
>Connect. mode
Scroll to Auto or Manual and
then press SELECT to set.
3
CONNECTION MODE
>Auto
1
Press the Bluetooth key
on the cordless handset.
Set auto connection / manual connection
Remove Bluetooth headset
Check the name of the paired Bluetooth
headset.
1
Press the Bluetooth
key on the cordless
handset.
Scroll to Headset name
and then press SELECT.
2
BT On/Off
>Headset name
<Headset name>
1
Press the Bluetooth
key on the cordless
handset.
Scroll to Remove headset
and then press SELECT.
2
Headset name
>Remove headset
Press SELECT to
confirm.
3
Remove
<Headset name>?

VTech SN5147 Specifications

General

Color	white
Speakerphone	yes
Expandable	yes
Paging Locator	yes
Volume Control	yes
Intercom	yes
Incoming Lines	1
Visual Ring Indication	yes
Dialing Mode	pulse, tone
Record Time	22 minutes
Display Type	lcd
Message Counter	yes
New Message Indicator	yes
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	yes
Redial Function	yes
Conference Call	yes
Conference Call Capability	yes
Mute	yes
Hold Button	no
Speed Dial Memory	yes
Caller ID Memory	50 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	1, 4
Backlit Keypad	yes
Keypad Location	handset
Bluetooth	no
Remote Access	yes
Frequency	1.9ghz