VTech SN5147 User Guide

66 67
7. Smart call blocker
Smart call blocker
Call categories
Calls are classified into four categories. Smart call blocker handles the calls in the
following ways:
Call category Call control
Welcome calls
• Numbers saved in allow list.
• Numbers saved in phonebook.
• Numbers not found in block list.
• Names saved in star name list.
Allow
The telephone rings when there is an incoming call with
number saved in your allow list or phonebook, but not in
your block list. Robocalls with caller names saved in your star
name list will also ring.
Unwelcome calls
• Numbers saved in block list.
Block
The telephone does not ring when there is an incoming call
with number saved in your block list, and the call will be
rejected.
Call category Call control
Calls without numbers
• Numbers that are “out of
area” or set to “Private“.
Uncategorized calls
• With absent caller ID
number.
• Numbers not found in
phonebook.
• Numbers not found in
allow list.
• Numbers not found in
block list.
• Caller ID names not found
in star name list.
Option 1: Screening with caller name
If you have selected this option, the telephone plays the screening
announcement, and then asks the caller to say his/her name before
the call rings on your telephone. You will then hear the caller’s name
announced if you have turned on the caller ID announce feature.
Then, you can decide whether to accept or reject the call, or to
forward the call to the answering system.
Option 2: Screening without caller name
If you have selected this option, the telephone plays the screening
announcement, and then asks the caller to press the pound key (#)
before the call rings on your telephone. You can then answer the call.
Option 3: Allow (default settings)
The telephone allows the calls to get through and ring. The caller’s
number will not be saved to the allow list.
Option 4: Answering system
If you have selected this option, the telephone forwards the calls to
the answering system without ringing.
Option 5: Block
If you have selected this option, the telephone rejects the calls with
block announcement without ringing. The caller’s number will not be
saved to the block list.

VTech SN5147 Specifications

General

Color	white
Speakerphone	yes
Expandable	yes
Paging Locator	yes
Volume Control	yes
Intercom	yes
Incoming Lines	1
Visual Ring Indication	yes
Dialing Mode	pulse, tone
Record Time	22 minutes
Display Type	lcd
Message Counter	yes
New Message Indicator	yes
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	yes
Redial Function	yes
Conference Call	yes
Conference Call Capability	yes
Mute	yes
Hold Button	no
Speed Dial Memory	yes
Caller ID Memory	50 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	1, 4
Backlit Keypad	yes
Keypad Location	handset
Bluetooth	no
Remote Access	yes
Frequency	1.9ghz