VTech SN5147 User Guide

68 69
7. Smart call blocker
Smart call blocker
Set Smart call blocker on/off
1
Press CALL BLOCK when
the handset is not in use.
HANDSET
10:15PM 12/25
ANS ON
Press SELECT to select
SCB On/Off.
2
>SCB On/Off
Block list
Scroll to On or Off, and
then press SELECT.
3
SCB ON/OFF
>On
Set welcome calls
Add allow list entry
Add numbers to the allow list that you want to allow their calls to get through to you.
The allow list stores up to 200 numbers.
1
Press CALL BLOCK when the handset is not in use.
Enter the phone number
and name, and then press
SELECT to save.
4
ENTER NUMBER
595-9511_
ENTER NAME
Mike Smith_
Scroll to Allow list, and
then press SELECT.
2
Block list
>Allow list
Scroll to Add new entry,
and then press SELECT.
3
Review
>Add new entry

VTech SN5147 Specifications

General

Color	white
Speakerphone	yes
Expandable	yes
Paging Locator	yes
Volume Control	yes
Intercom	yes
Incoming Lines	1
Visual Ring Indication	yes
Dialing Mode	pulse, tone
Record Time	22 minutes
Display Type	lcd
Message Counter	yes
New Message Indicator	yes
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	yes
Redial Function	yes
Conference Call	yes
Conference Call Capability	yes
Mute	yes
Hold Button	no
Speed Dial Memory	yes
Caller ID Memory	50 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	1, 4
Backlit Keypad	yes
Keypad Location	handset
Bluetooth	no
Remote Access	yes
Frequency	1.9ghz