VTech SN5147 User Guide

100 101
9. Additional devices
Additional devices
Set call divert number
Audio doorbell (Model SN7021 , purchased separately)
You can divert all doorbell calls to a preset external number, or decline a doorbell call and
forward the doorbell call to the preset external number.
1
Press MENU on the handset when it is not in use.
Scroll to Set device, and
then press SELECT.
2
Settings
>Set device
Scroll to Doorbell, and
then press SELECT.
3
Check signal
>Doorbell
Scroll to Dbell divert, and
then press SELECT.
4
Record DB call
>Dbell divert
When a visitor presses the doorbell and the doorbell call is diverted to the
preset number, the call receiver of the preset number hears the message
“This is a diverted call from doorbell. Please press any number key to start the
conversation.“ Your telephone is set to record all doorbell call conversations by
default. You can disable the setting. See Record doorbell call on page 99.
Scroll to Preset number,
and then press SELECT.
5
Divert mode
>Preset number
Enter the destination
number.
6
PRESET NUMBER
_
Press SELECT to save.
7
PRESET NUMBER
595-9511_

VTech SN5147 Specifications

General

Color	white
Speakerphone	yes
Expandable	yes
Paging Locator	yes
Volume Control	yes
Intercom	yes
Incoming Lines	1
Visual Ring Indication	yes
Dialing Mode	pulse, tone
Record Time	22 minutes
Display Type	lcd
Message Counter	yes
New Message Indicator	yes
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	yes
Redial Function	yes
Conference Call	yes
Conference Call Capability	yes
Mute	yes
Hold Button	no
Speed Dial Memory	yes
Caller ID Memory	50 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	1, 4
Backlit Keypad	yes
Keypad Location	handset
Bluetooth	no
Remote Access	yes
Frequency	1.9ghz