VTech Switch&Go DINOS User Manual

9
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries if the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please
follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play with again.
5. If the unit still does not work, install a new set of batteries.
If the problem persists, please contact our Consumer Services
Department and a service representative will be happy to help you.

VTech Switch&Go DINOS Specifications

General

Material	Plastic
Manufacturer	VTech
Power Source	Battery Powered
Features	Transforms from dinosaur to vehicle, sounds, lights
Educational Aspects	Imaginative Play
Battery Type	AA batteries
Product Dimensions	Varies depending on the specific model
Item Weight	Varies depending on the specific model
Age Range	3-8 years