11
Basic Operation
Telephone Operation
Handset Ringer Style/Battery Save
You can select from four different Handset ringer styles, or turn the ringer off and
extend the battery life.
1 Make sure the Handset is off.
2 Press PROG/CHAN to enter programming mode.
3 Press until the screen displays RINGER:.
4 Press SELECT. The current setting blinks, and you will hear a sample of the ring.
5 Press or to select RINGER:1, 2, 3, 4 or OFF. You will hear a sample
of each ring.
6 Press SELECT to choose the displayed ringer setting.
Temporary Tone Dialing
If you have dial pulse (rotary) service, you can change from dial pulse to touch
tone dialing during a call by pressing
*
TONE. This is useful if you need to send
touch tone signals for access to telephone banking or long-distance services.
1 Dial the number.
2 Press
*
TONE. Buttons pressed after this send touch tone signals.
3 After you hang up, the phone automatically returns to dial pulse (rotary)
service.
Headset Jack
You can use this telephone hands-free when you install any VTech 2.5 mm
Headset, purchased separately.
Plug the headset into the jack located
on the right side of the Handset
(under the small rubber flap).
Do not force the connection,
but make sure the plug
fits securely.
To Next Page
Loading...
Need help?
General
