To Next Page

To Previous Page

Basic Operation

4 Press SELECT. The screen displays ERASE NO YES and the number.

The current choice flashes.

5 Press until YES flashes.

6 Press SELECT. You will hear a beep confirming the deletion.

Telephone Memory

5 When you finish entering the name, press SELECT or PROG/CHAN. The

screen displays ENTER NUMBER.

6 Enter the telephone number. Use to backspace and make a correction. Press

REDIAL/PAUSE to store a pause in the dialing sequence.

 OR 

Press REDIAL/PAUSE to display the last number (up to 24 digits long)

dialed from this phone.

7 Press SELECT or PROG/CHAN to store your entry. The screen displays

DISTINCT RING? and the current setting.

8 Press or to change the setting. Choose Y (for Yes) if you wish the phone

to alert you to calls from this number by changing to a distinctive ringing

pattern after the first ring. Choose N (for No) for a normal ringing pattern.

9 Press SELECT or PROG/CHAN to confirm your selection. If you chose Y in

Step 8, a D will be displayed with the entry.

Edit a Number/Name Stored in Memory

1 Press MEM . The screen displays ENTER 0-9.

2 Press the memory location key of the entry you wish to edit.

3 When the screen displays the number you want to edit, press SELECT.

Then press until EDIT flashes.

EDIT DIAL ERASE

9735550123

4 Press SELECT. The screen displays the name and number. The flashing

cursor appears at the end of the name. Use , and the dial pad keys to

edit the name. Press SELECT to move on to edit the number. Use to

backspace and make corrections. Press SELECT to move on to edit the

Distinctive Ring setting.

5 Press SELECT to save the edited information.

Delete a Number/Name Stored in Memory

1 Press MEM . The screen displays ENTER 0-9.

2 Press the memory location key of the entry you wish to delete.

3 When the screen displays the number you want to delete, press SELECT.

Then press

until ERASE flashes.

EDIT DIAL ERASE

9735550123

VTech t2451 User Manual

Other manuals for VTech t2451