15
15
15
D:Finally,connectRamp Track B to Ramp Tracks A and C, as
shown in the picture. You will hear a “click” sound to indicate
the pieces are secure.
8. Insert the three Ferris Wheel Vehicles into the Ferris Wheel.
You will hear a “click” sound to indicate the Ferris Wheel
Vehicles are secure. Then, screw the Ferris Wheel into the top
of the Roller Coaster Structure, as shown below.
9. Insert the Go! Gate into the SmartPoint
TM
Gate Track and
insert the Gate into the End Track, male as shown below. You
will hear a “click” sound to indicate each gate is secure.
To Next Page
Loading...
