VTech Toot-Toot Drivers Garage - Page 12

11
11
11
3. Next,assembleandattachtheliftcomponentsfollowingthesteps
below:
A. Slide the Lift Platform into the slot on the Lift Wall, as shown
below. Lift the handle and press down on the Lift Platform to
lower it.
B. Then, attach the Lift Wall to the Base and First Level Platform,
as shown below. You will hear a “click” sound to indicate the Lift
Wall is secure.
C. Connect the Lift Bracket to the Lift Wall and Lift Gate, as shown
below. Pull down on the Lift Bracket to make sure it is secure.