6
minutes, depending on the type of batteries in use. After that, the
console will show the screen below for 5 seconds, and then will
turn OFF automatically.
AC ADAPTOR
• Use a
VTech
®
9V 300mA AC/DC adaptor or a standard AC/DC
adaptor with equivalent specification.
• Make sure the unit is turned
OFF.
• Plug the power jack into the 9V DC socket at the back of the unit.
• Plug the AC adaptor into a wall socket.
NOTE: The use of an adaptor will override the batteries. When the toy is
not going to be in use for an extended period of time, unplug the
adaptor.
Standard Guidelines for Adaptor Toys
• The toy is not intended for use by children under 3 years old.
• Only use the recommended adaptor with the toy.
• The transformer is not a toy.
• Never clean a plugged-in toy with liquid.
• Never use more than one adaptor.
• Do not leave the toy plugged-in for extended periods of time.
CONNECTING TO A TV
NOTE: Before you connect the V.Smile™ TV Learning System to a TV,
check to make sure that the unit is working. Once you have turned
the unit ON, the power indicator light (ON/RESTART Button)
should glow. If the ON/RESTART Button does not glow, check to
see that the adaptor is connected correctly, or that the batteries
are installed correctly. If the batteries are not installed correctly,
the V.Smile™ TV Learning System will not function and damage
to the unit could result. Make sure that your TV and the unit are
turned OFF before you begin making connections.
INSTRUCTIONS
To Next Page
Loading...
Need help?
General
