VTech VCS601 - App and Factory Reset

11
To check the speakerphone battery level:
• Press the key.
The multicolored LEDs turn purple to indicate battery charge level.
The more purple LEDs displayed, the higher the battery charge level.
When the battery is low, the speakerphone beeps rapidly and all multicolored LEDs ash red rapidly
every three minutes.
App
The VTech Companion Devices app is available on the iTunes store and the Google Play store.
This app enables you to perform the following functions on the VCS601 speakerphone:
• Set power save time
• Enable/disable key tone
• Upgrade rmware
For more information, refer to the app’s online help -- tap and then tap Help.
Factory reset
1. Press and hold the key for ve seconds.
The multicolored LEDs 1, 3, 5, 7 ash red quickly for three seconds and the speakerphone plays a
tone.
2. Press the key twice within three seconds.
The multicolored LEDs turn o󰀨 and the speakerphone plays three ascending tones.