6
19. Use only the power cord indicated in this manual.
20. For pluggable equipment, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
21. In wall mounting position, make sure to mount the telephone charger on the
wall by aligning the eyelets with the mounting studs of the wall plate. Then
slide the telephone charger down on both mounting studs until it locks into
place. Refer to the full installation instructions in “Handset Installation” on
page 12 in this User Guide.
22. CAUTION: Keep small metallic objects such as pins and staples away from
the handset receiver.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
