EasyManua.ls Logo

Vuly Quest L - Care and Maintenance; General Care; Rust and Corrosion; Textile Deterioration

Vuly Quest L
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
1.0. Care and Maintenance
Improper maintenance or lack of care can lead to your system deteriorating earlier than expected and causing injury. Please
follow these instructions to ensure that your product lasts for as long as possible.
1.1. General care
Retain this Manual.
Inspect before and after each use.
Replace any worn, deteriorated, defective or missing parts
immediately and only through Vuly.
Tighten all hardware, including elements that secure the system
to the ground.
Keep away objects that could damage textile components.
Ensure that moving steel components remain well lubricated.
Use only parts and accessories recommended by Vuly.
1.2. Rust and corrosion
Be aware of, and check, areas that are particularly prone to
rusting:
Places where water is easily trapped.
Hollow sections of steel (which can appear in good
condition on the outside, while hiding rust on the inside).
Sections where steel components join together.
Inspect the inside of all tubes every 6 months – as well as after
rain – and remove any water from the inside surfaces.
Use general-purpose grease on steel connection areas.
Avoid cleaning steel components excessively; it may reduce the
effectiveness of their protective coatings.
1.3. Textile deterioration
Remove textile parts, and store them – in their original packaging
– in a cool, dry and dark place when the system will be unused
for over 1 month. Prolonged exposure to UV sunlight can shorten
the lifespan of textile materials.
1.4. Weather care
Components are susceptible to deterioration from use and
environmental conditions – such as sunlight, rain, salt and heat – to
varying degrees.
If your system will be unused for any extended period, disassemble
it, return it to its original packaging and store it in a dry place.
RAIN: Remove any fallen debris after rain and wipe off
residual water with a dry cloth. Moisture left on the
WIND: Disconnect any accessories, and cover the frame with
a storm cover.
HEAT: Cover when not in use to minimise UV damage.
COMPONENTS WILL DETERIORATE OVER TIME.
Record your date of purchase here:
/ /

Related product manuals