Vuly ULTRA - Page 14

14
A. Lift up the Safety Padding, and completely remove the
Spring first to the left of a T-Joiner. Feed the Spring through
the loop on the Safety Padding, before re-hooking it to the
Jump Mat and Curved Pole.
B. Repeat for each Spring and loop in the Safety Padding to
the left of every T-Joiner.
Remember: Ensure that the Safety Padding is correctly attached
and secured. Properly installed Safety Padding is crucial to
protect against injuries.
A. Insert each Upper Net Pole into each
Lower Net Pole. The Lower Net Pole is
square at the bottom.
B. Rest the completed Net Poles against
the frame at each T-Joiner.
Safety Padding
Net Poles
Place the Safety Padding onto the Jump Mat and Safety Net.
Unfold and position it to cover the Springs.
Ensure that all openings in the Safety Padding are over the Net
Pole holes in the T-Joiners and that the Vuly logo lines up with
the centre of the entrance.
11
STEP
12
STEP
10
STEP
A
B