13
Safety Net
Unravel your Safety Net
and lay it atop your Jump
Mat.
7
STEP
A. Find the the Batch Tag on the Safety Net that is to the left of the door, and rotate the Safety Net so that this Batch Tag lines up
with the Batch Tag on the Jump Mat.
Remember: Ensure that the PP belts on the Safety Net are on the outside.
B. Unhook the Orange D-shackle, and slip it through the net connector hole to the second right of the PP belt, before re-attaching
it to the Net and frame.
C. Repeat for each Spring and Orange D-shackle.
Make your way around the frame, slipping all D-shackles
through their corresponding net connector holes.
Go around your trampoline, attaching one
Spring per frame section to the Jump Mat
and pulling it into the Spring holes on the
frame. Ensure that the D-shackles remain
slipped through the net connector holes as
you do so.
Remember: Spring holes alternate between
atop and beneath the Curved Pole.
6
STEP
8
STEP
9
STEP
A B C
To Next Page
