Vu+ Ultimo User Manual

Guide for connecting satellite and cable TV signal cables to the tuners.

Instructions for connecting the TV using an HDMI cable for best picture quality.

Steps for connecting the power cord and turning on the device.

Explanation of complete shutdown, standby, and deep standby modes.

Settings for DVB-S2 tuner configuration, including connection modes.

Explanation of different satellite connection modes like Single, Toneburst A/B, and DiSEqC A/B.

Configuration for DiSEqC A/B/C/D and using a positioner for motorized antennas.

Options for DVB-T terrestrial providers and scan bands.

Choosing between automatic and manual channel scanning.

Steps to set up the satellite connection using the installation wizard.

Steps and options for performing an automatic channel scan.

How to perform a manual channel scan with detailed settings.

Methods to switch between channels using UP/DOWN, LEFT/RIGHT, and numeric keys.

Adjusting audio volume and muting the sound using the remote.

Starting an immediate recording of the current program.

Setting recording duration, end time, or indefinite recording.

Functions for adding, deleting, and disabling timers.

Removing finished timers and how to stop an ongoing recording.

Managing scheduled recordings using the Timer List.

How to select DVB-C or DVB-T tuner type for hybrid tuners.

Accessing the System Setup menu for various configurations.

Manually configuring settings for channel scanning.

Detailed parameters for manual scanning (Frequency, Symbol Rate, Polarity, FEC, etc.).

Choosing between automatic and manual scan methods.

Adjusting audio and video output settings, including color format and aspect ratio.

Configuring video output (CVBS, S-Video, RGB) and resolution modes.

Configuring recording priority and margins before/after recording.

Configuring Ethernet adapter settings, including DHCP and IP addresses.

Setting up nameservers and testing the network connection.

Setting up tuners and performing channel scans.

Performing an automatic scan to find TV and radio channels.

Resetting the device to factory defaults, erasing all configurations.

Configuring individual tuners (A, B, C) and their settings.

Step-by-step guide for installing the USB Wi-Fi dongle.

Configuring the wireless network connection settings.